Making Sense of Fluke Teasers

Fluke Teasers

Big fluke show no aversion to bright teasers. Tip you teaser lightly; a single spearing, sand eel, strip of squid or Gulp! minnow is all you need.

Adding a teaser to your favorite fluke rig is all the rage these days and they should be. These tiny tempters not only offer a second hook for fluke to smack, they add flash plus lively action to almost any rig. The combination of a big bait on the bottom hook and a small one dancing just above is enough to excite anything from shorts to doormats. Truth be told, adding a teaser makes it more likely that a fluke will strike either hook.

But which teaser color and style is best? That’s a question that can spark quite a debate. Some anglers, for example, depend on a specific color or pattern. Others favor teasers that are sparsely tied while another school holds that full-bodied teasers attract bigger fish. A fair number of fluke sharpies like their teasers to sport wide-gap or octopus-style name-brand hooks, but I know nearly as many excellent fluke fishermen who opt for the simple flash of a little bucktail hair wrapped around a stainless steel sproat. Among my fluke-seeking buddies are those who position teasers three feet above the bottom hook or jig, others that tie them at six to eight inches, and a slew insisting that 12 to 14 inches above the bottom hook is the right height no matter where you fish.

This happy angler drilled a 7-pound pool winning summer flattie on a fluke ball fished beneath a teaser while jigging aboard the open boat Shinnecock Star. He released this trophy to fight another day.
This happy angler drilled a 7-pound pool winning summer flattie on a fluke ball fished beneath a teaser while jigging aboard the open boat Shinnecock Star. He released this trophy to fight another day.

There are anglers who will use soft plastic lures and grubs as fluke teasers, those who tie on the cheapest puff of attractant they can buy, and others willing to invest a lot of time and money to create or track down virtual works of art to lure in their catch. All this, and we haven’t even touched on whether or not a teaser should be worked straight up and down or allowed to drop back with a little scope in the line.

Then there is my buddy Michael Potts, skipper of the Montauk charter boat Blue Fin, IV, and one of the better fluke skippers I know. He claims that fluke teasers aren’t really teasers at all since true “teasers” don’t have hooks. “Check your umbrella rig, or an offshore tuna spread,” he antagonized me in one discussion, “See the hookless tubes and birds? Those are real teasers.”

Ah, the semantics of the fishing game. But Potts actually is right if we get really technical about things. Still to most local anglers fluke teasers are simply any dressed upper hook on a high-low rig. The primary dressings can include bucktail hair, synthetic materials such as Mylar, Flashabue or Krystal Flash, feathers or soft plastic grubs. Call them what you want, and choose whichever style catches your fancy but know this much is certain: adding a teaser to your favorite fluke rig virtually guarantees more summer flatties over the course of a season.

 Some anglers use the same teaser under all conditions but most sharpies vary their choices based on local conditions and the “hot” bite of the day.

Some anglers use the same teaser under all conditions but most sharpies vary their choices based on local conditions and the “hot” bite of the day.
COLOR BASICS

Naturally, there are a few points to keep in mind when selecting fluke teasers and, despite all the debate, several patterns seem to hold true across most fluking hot spots. Consider color, for example. White teasers seem to produce just about everywhere, and these serve as a good control option since you know they should bring at least a fair response. I think they tend to work best in clear water, especially on sunny days.

Chartreuse is another teaser color that sees regular action. Because of its high visibility, it is a great initial choice when the water is murky. Pink is yet a third top producer, especially when the fluke are feeding on local squid or mantis shrimp when the season first opens, or on small calico crabs in mid-summer. Black works well when you have to deal with a bit of brown tide.

After these choices, it’s a free-for-all. Olive and green have many followers when sand eels or spearing abound. Orange and red match up well to young sea robins. Silver and blue complement peanut bunker, rain bait, or small snappers, while yellow or gold are a good match if juvenile weakfish or a set of small blowfish take up temporary residence in your favorite fluke haunt. No matter the color, most fluke teasers, I think, are made more effective when tied with a white belly section, or at least a few strands of synthetic material that add flash or iridescence to the pattern.

TIPPING IS ENCOURAGED

Tipping fluke teasers with a piece of bait is one theme that seems to have nearly universal appeal. Most sharpies select a spearing, sand eel or short, thin strip of squid or fish belly to add a little scent and taste to their offerings. Some just use plain Gulp! Either way, the key is to keep the added bait relatively light so that the teaser will continue to dance seductively above the lower bait or jig. In other words, tip accordingly without being overly generous. Larger teasers can handle larger baits.

This brings up the question of teaser size. Some anglers use the exact same color and teaser size wherever they fish. Most highly successful fluke anglers, however, base teaser size on where they fish and the size of the fluke they hope to catch. Size 2/0 and 3/0 teasers can provide a lot of fun with fluke inside bay and harbor waters. They are small enough to provide plenty of action and big enough to turn the head of an occasional keeper. I crush the barbs on these teasers when I fish in shallow areas where shorts are sure to outnumber keepers by a wide margin.

If keepers are definitely in the game plan, a size 4/0 to 5/0 teaser is a more logical choice. The larger profile of these sizes seems to discourage short fluke, and sometimes even intimidates sea robins. I like a 4/0 for most of my South Shore inlet and Long Island Sound fishing. For open ocean waters, or ports with a big fish reputation such as Mattituck, Orient or Greenport in the spring, or Montauk any time, the 5/0 size generally sees more time in the water. It discourages small fish from biting, can be tipped with a decent sized sweetener, and has the strength to handle the biggest fluke you’ll ever hook.

X